The Tec8'S Effects; Distortions; Equalizer; Choruses - DOD TEC8 Owner's Manual

1

The TEC8's Effects

The TEC8's library of effects is capable of handling virtually any musical sit-
uation. The following charts give you relevant information about each
module's settings. For example, Noise Gates, Detuners, and Pitch Shifters
are not shown because their Module names are relatively self explanatory
and are displayed on the front panel. The Fast Swell and Slow Swell Noise
Gates have attack times of 500 ms and 1000 ms respectively, which create
a volume pedal or bowing type effect.
DISTORTION
The TEC8 gives you 8 distortions to choose from, 4 of which
include Cabinet Emulation. Each distortion has 10 settings, giving
you plenty of selections when using either an amp or for going
direct into a mixer or recording device.
Name
IT
Grind
Fuzz
FuzzIT

EQUALIZER

The TEC8 is equipped with a flexible 3-band graphic EQ capable of
boosting or cutting each band by 12dB.
Low EQ @ 150Hz
+/- 12dB

CHORUSES

A chorus works by splitting the input signal into 2 paths. One path
remains unaffected while the other is delayed and the pitch is modu-
lated slightly. Both are then mixed back together. Chorus is used to
create lush thickening effects or wild pitch modulation.
Signal Processing Signal Processing
Press the effect Select button to toggle the effect in and out of
bypass mode.
REMEMBER: The decimal point indicates that the value shown in
the display is not the stored value.
To Bypass the selected Program:
1) Press the currently selected Program footswitch on the pedal-
board. The footswitch's Status LED flashes and the display
reads:
This indicates that the current program is bypassed. The
Program selector footswitch toggles the TEC8 in and out of
bypass mode.
Gain/(Setting)
1-10 (1-10)
1-10 (11-20)
1-10 (21-30)
1-10 (31-40)
Mid EQ @ 1kHz
+/- 12dB
b p
Name
IT (SpkrSim)
Grind (SpkrSim)
Fuzz (SpkrSim)
FuzzIT (SpkrSim)
Gain/(Setting)
1-10 (41-50)
1-10 (51-60)
1-10 (61-70)
1-10 (71-80)
High EQ @ 7kHz
+/- 12dB
9