Changing The Tuning Reference; Factory Program Reset - DOD TEC8 Owner's Manual

To change tuning reference: Press and hold the currently selected
program's footswitch. The display will read tu. Turning the data wheel
will select one of 3 references, Standard or A, 1/2 step down or Ab, or
Whole step down or g tuning. Now guitars that are tuned a 1/2 or whole
step lower than standard will still read the normal letter of the selected
string in the display.

Factory Program Reset

Resetting the TEC8 will erase all User programs and restore them to their
original Factory settings. Remember, when resetting the TEC8, all previ-
ous User settings will be lost.
To reset the TEC8
1- With the power off, press and hold the Low EQ and Mid EQ effect
2- Connect the power while still hold the buttons down. The display will
At this point, all User presets will now be restored to their original Factory
settings
12
Signal Processing
group buttons.
read:
r S