Operation; Starting-Up And Temperature Regulation; Storage Of Foods In Refrigerator Compartment - Zanussi ZD 19/5 R Instruction Booklet

OPERATION

Starting-up and Temperature Regulation

Insert the plug into the wall socket. Open the
refrigerator door and turn the thermostat knob, to
be found on the upper right side of the inner liner,
clockwise, beyond the «O» position, to start the
appliance.
Temperature adjustment is obtained by turning the
thermostat knob to the required setting. A medium
setting is generally the most suitable.
However, the thermostat knob setting should be
adjusted depending on the temperature required
inside the appliance. This, in turn, depends on a
number of factors such as the ambient temperature,
the number of times the door is opened, the
quantity of food stored and the location of the
appliance. Turn the knob clockwise, to higher
numbers, to obtain a lower temperature, or
anticlockwise if a higher temperature is required.

Storage of foods in refrigerator compartment

To achieve the best results with the refrigerator
compartment, you should follow one or two very
simple rules:
Do not put warm foods or evaporating liquids in the
refrigerator.
Cover or wrap foods (particularly if they have a
strong smell or contain aromatic herbs).
Do not cover the shelves (grids) with paper or
plastic since this blocks circulation of air in the
compartment.
Raw meat (beef, pork, lamb & wild fowl): wrap in
polythene bags and place on top of the salad crisper
and, for safety, only store in this way for one or two
days at the most.
Fruit & vegetables: these should be thoroughly
cleaned and placed in the bottom salad crisper.
Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be
stored in the bottle rack on the door.
38
Movable wire shelves
D040
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the
arrows until it comes off, then reposition as
required.
D758
Fig. 7
The walls of the
refrigerator are
equipped with a
series of runners
so that the
shelves can be
positioned as
desired.
Fig. 8