Installation; Unpacking - Zanussi FLS 1002 V Instruction Booklet

Installation

Unpacking

You are advised to keep all the packaging for re-use in
case the appliance has to be transported again.
Before starting the machine up, the transport
security bolts must be removed as follows.
Unscrew and remove the three rear transit bolts
(using a spanner).
Lay the machine gently on its back, making sure that
the hoses are not squashed.
We suggest a polystyrene angle bracket from the
packing is placed on the floor before tilting it back to
avoid the hoses being squashed.
Carefully remove the polyethylene bags located at
the base of the machine by pulling them toward the
centre of the machine.
Place the machine in an upright position and remove
the three plastic bolts.
Plug the 3 holes with the plastic plugs which you can
find in the envelope containing the instruction
booklet.
P0287
P0018
1
2
AL009
P0001
P0002
17