La Crosse Technology D012.104.E1 User Manual

Add-on Sensor for existing
La Crosse Alerts™ Remote Water Detector &
Temp. & Humidity Monitor w/ Early Warning Alerts
Model: D012.104.E1
Did you know that frozen pipes that crack and burst damage a
quarter million properties each year? The best defense against
costly water damage to your home, business or vacation rentals
is the La Crosse Alerts™ Remote Water Detector with early
warning alerts to notify you of a water leak before it has time to
cause extensive damage.*
Use your smartphone, tablet or computer to monitor for water
leaks and high or low temperature and humidity levels that could
lead to frozen pipes and mold growth.*
Water damage can originate in almost any room: frozen pipes,
broken pipes, broken dishwasher hose or leakage, washing
machine overflow, leaking roof, basement leaks, foundation
cracks, plumbing leaks, sump pump overflow and leaks from
bad weather such as snow, rain or floods.*
The good news is that water damage is a costly problem that
you can prevent with text and e-mail alerts from anywhere with
Internet access.*
Wall-mount the water detector, or use the included tabletop
stand and place the H2O sensor on the floor to activate the
wireless alert system when it becomes wet.* Alerts are sent
when pre-set temperature and humidity levels are exceeded,
water is detected and when the batteries are low or the
connection is lost, saving you from having to stop and check.*
MONITORING OPTIONS

Home, second home, office or rental property

Kitchens, baths, laundry & pool rooms

Utility sinks, sumps & water heaters

Basements, garages & attics

Near aquariums & terrariums

Greenhouses & farms
PACKAGE CONTENTS (D012.104.E1)
1. Wireless water detector with ambient temperature and
humidity monitor (TX70U-IT)
2. H20 (water) sensor on 6 Ft. detachable cable (D000.104)
that detects WET (H20) or DRY (DRY) conditions.
3. Mounting hardware
4. Instruction manual
5. IMPORTANT: Activation Key Card for set up and
activation. Do not throw away.
ADDITIONAL EQUIPMENT (NOT INCLUDED)
 Two fresh AAA, IEC LR03, 1.5V Alkaline batteries
 Two-sided tape as needed
 Internet Gateway, AC adapter and LAN cable - (all parts of La
Crosse Alerts™ full kits, not included)
 Browser with high speed Internet

Network router
FEATURES AND MEASUREMENTS (Diagram 1)
(A)
LCD
LED
Button
(B)
**H2O sensor with
6-foot wire to plug into sensor
(A) TX70U-IT Wireless Water Detector / Ambient Sensor:
Displays ambient temperature and humidity (Channel 1)
Note: The TX70U-IT water detector case with LCD is
not water proof. The case cannot get wet and may be
affected by high humidity conditions.

Monitors ambient air temperature and humidity (CH1)
and displays water status determined by H20 sensor
(CH2)

Weather resistant case (not water proof)

Wall hanging or free standing

Add up to 5 sensors (sold separately) per Internet
gateway(not included) to monitor additional areas

200 Ft wireless range
(B) D000.104 Water Sensor on 6 Ft. Detachable Cable:
Detects the presence or absence of water which is displayed on
the LCD: WET (H20) / DRY status (Channel 2)
The detachable H20 (water) sensor detects water.

**Attach it to the main sensor case and place the
sensor on the floor or other area you wish to monitor
for WET/DRY conditions.

**The official D000.104 H20 Sensor can be plugged
into the sensor at any time without resetting.

The wireless sensor transmits water status & temperature
and humidity measurements to a La Crosse Alerts™
Gateway (not included) within a 200 Ft. (60.96m) wireless
range.*

The Gateway (not included) connects to your existing
network router and uses your high-speed Internet
connection to upload collected measurements to your own
account at www.lacrossealerts.com.*

Once the Gateway (not included) and temperature and
humidity sensor are activated on your account, you can
monitor sensors online from a smartphone, tablet or
computer, and set up custom e-mail/text alerts*.
This socket is ONLY
for the water sensor.
DO NOT insert
power plug into it.
1. Begin the set up near your existing network router and a
computer with high-speed Internet access.
2. Unpack package contents and insert the H2O sensor cord
into the TX70U-IT water detector (see diagram 1).
1. Locate the Activation Key Card in the package for setup
instructions and the Activation Key. The Activation Key is
necessary to activate your sensor. Please keep your
Activation Card for reference.
2. Visit www.lacrossealerts.com with your Activation Key
Card to create your account and activate the product.
ACTIVATION INFORMATION:
THE INCLUDED ACTIVATION KEY is good for
1 year of ENHANCED SERVICE with early warning
text & e-mail alerts, plus 4 more years of BASIC
SERVICE for standard remote monitoring.
Once the sensor is activated and building a measurement log,
you can download the data as a comma separated values
(CSV) file. You must use an application such as Microsoft
Excel® or Google Docs® that supports comma separated
values (CSV) formatted files to view the table data.
HOW IT WORKS
PREPARE FORSETUP
SETUP AND ACTIVATION
Lost your Activation Key Card?
Contact Customer Support:
www.lacrossetechnology.com/support/alerts
Phone: (608) 785-7920
MEASUREMENT LOG DOWNLOAD