Use; Control Panel; Controls - Zanussi FLN 660 User Manual

Use

Control panel

A B 60º- 90º
B 30º- 60º
C 30º- 40º
D
F
G
1 Programme chart
It will help you to choose the most suitable washing
programme for your laundry.
2 Spin speed selector
This dial has the following positions:
= no spin for cotton
300 = MIN, for cotton and programme P (short
spin)
600, 800, 1000 (according to the model) = MAX,
for cotton.
For synthetics, delicates and wool (programme P -
short spin) the maximum position corresponds to
550 rpm for model FLN 660 and 750 rpm for FLN
804, FLN 860, FLN 1021, FLN 1060 and FLN 1074.
The intermediate positions refer to spin speed values
for cotton.
3 Intensive rinse button
By depressing this button on programmes for cotton
and linen the machine will perform the rinses with
high water level.
To be used in areas where the water is very soft or
for people allergic to detergents or who have very
delicate skin.
H 30º- 60º
J
K 30º- 40º
30º- 40º
L
M 30º- 40º
N
P
Q
1 2 3 4
4 On/Off button
Press this button to start the machine. The same
button is used to switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the On/Off button.
5 Temperature selector dial
(thermostat)
To select the washing temperature turn the dial to
the required value.
When your laundry is only lightly soiled, a cold wash
can be used (dial to position
6 Mains-on light
It comes on when the machine starts operating and
goes out at the end of the programme.
7 Programme selector dial
To select the required washing programme turn the
dial clockwise.
30
5 6 7
).
FLN 1074