Operating Sequence - Zanussi FLD 1000 User Manual

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the soak or a programme with
prewash, pour detergent into the appropriate
compartment marked
3. Measure out the additives
If required, pour fabric softener into the compartment
marked , and bleach into the compartment
marked
«MAX» mark.
.
.
without exceeding the
4. Select the temperature
Turn the dial to the required setting.
5. Select the required option(s) and
the spin speed
6. Select the programme and start
the machine
Turn the programme selector dial clockwise to the
required programme and press the ON/OFF button:
the mains on light comes on and the machine starts
to operate.
36