Table of Contents
Advertisement
• If you need to stop the machine to put in more
laundry (having selected DELAY START option
first), proceed as follows:
1. Depress START / PAUSE button.
2. Turn the dial programme selector to position "
3. Wait two or three minutes before opening the
door to give the electric locking mechanism
time to release.
4. Place the laundry in the drum.
5. Follow the normal operating sequence to select a
programme.
DELAY START OPTION CAN'T BE SELECTED
WITH
SPIN and
DRAIN programmes.
7. Programme progress display
When DELAY START option is chosen, the light
relevant to the selected delay lights up.
After the machine has started, the remaining time is
shown by the corresponding indicator light.
During programme cycle the light WASHING will
remain lit.
The light END will illuminate to indicate that the
selected programme has finished.
The light END flashes in the event of operating
problems:
• 4 flashes: door open.
• 2 flashes: problem with water draining.
• 1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.
8. Spin speed selector dial or
no spin /
O
".
This dial allows the reduction of the final and the
intermediate spin speed or to select
RINSE HOLD options.
The position 800 r.p.m. corresponds to 700 r.p.m.
for delicates.
Position 500 r.p.m. is common for all fabrics.
•
NO SPIN: by selecting this option all the
spinning phases are turned off. To be used for
extremely delicate items. The washing machine will
add 3 rinses in the cotton programmes and 1 rinse
in the synthetics programmes.
•
RINSE HOLD: by selecting this option, the
water of the last rinse is not drained, in order to
prevent the fabrics from wrinkling. When the
programme has finished, FIN light will illuminate.
To drain the water follow these three steps:
A) Turn the programme selector dial to "
B) Select
DRAIN or
C) Press INICIO / PAUSA button.
35
rinse hold options
NO SPIN or
O
".
SPIN programme.
Advertisement
Table of Contents
