Installation; Ignition Of Hob Burners; Instructions For The User - Zanussi Gas cooker User Manual

INSTRUCTIONS FOR THE USER

INSTALLATION

It is important that all operations are carried out by
qualified personnel, in the normal manner.
The specific instructions are describred in the chapter
on installation.
Before using the unit, take off the special protective
layer which protects the stainless steel and anodyne
tin parts.
The thermic insulation and the residue of oil from work,
can produce unpleasant smells during the first minut
of use. We suggest that the oven is warmed for 45
minutes at maximum temperature on its first use.
USE
Control knobs on the cooke
The knobs for using the gas cooker are found on the
control panel.
The regulation knobs hould be turned in anti-clockwise
direction until the small flame symbol, and vice-versa
for the larger symbol.
No gas supply
Maximum gas supply
Minimum gas supply

IGNITION OF HOB BURNERS

To ignite a burner, before positioning the saucepan,
approach with a flame (in models with electric ignition,
use the appropriate switch marked by a small start),
push the corresponding knob in completely and turn in
an anticlockwise direction to the maximum position;
upon ignition regulate the flame as required.
If after a few attempts the burner does not ignite, check
that the baffle and its cap are correctly positioned.
To interrupt the supply of gas, turn the knob in a
clockwise direction to the position " ".
During cooking, when using fats or oils, take
particular care as they can, when over-heated, self-
ignite.
Table 1
Table of minimum and maximum diameters of
recipients to be placed on burners.
Burner
Rapid (large)
S/Rapid (medium)
Auxiliary (small)
Fish kettle burner
min diam max diam
ø 160 mm ø 260 mm
ø 120 mm ø 220 mm
ø 80 mm ø 160 mm
120 x 270 210 x 380
Fig. 1
33