Use & Care Guide Guide d’utilisation et d’entretien Manual d uso y cuidado GWD860W-3 CAUTION: Before using water MISE EN GARDE: Avant PRECAUCIÓN: Antes de usar el dispenser, read this manual and d'employer votre distributeur...
Thank you for purchasing a Greenway ® Water Dispenser. Please read the enclosed operating instructions carefully and retain this booklet for future reference. We have carefully engineered your Greenway ® Water Dispenser to give you years of enjoyment and trouble free operation.
Page 3
YOUR GREENWAY ® WATER DISPENSER Bottle support collar Ready-To-Dispense indicator lights: Red: “flashing” Heater is in operation "on” The hot water has reached its optimum temperature and is ready for dispensing Blue: "on" The cold water has reached its optimum...
OPERATING INSTRUCTIONS Initial Product Cleaning Procedure As with most new appliances, it is recommended to clean the reservoir prior to first time use. 1. Make sure the unit is unplugged and power switch is turned off. Figure A 2. Remove the bottle support collar, saturate a clean cloth with water dispenser cleaner or vinegar and wipe the inside of the reservoir.
Page 5
IMPORTANT NOTICE ABOUT LEAKING BOTTLES If you find that your dispenser is leaking, check the water bottle first! Almost all 3 and 5 gallon water bottles are recycled, and handled extensively during cleaning, filling, and shipping. As a result they are very prone to developing pin holes or small cracks that can cause an overflow (or leak) when placed on top of a water dispenser.
Dispensing Hot Water This water dispenser has a power saving EZ-Heat button which activates the water heater only when pressed, so you get hot water on demand without the cost of constantly heating water! To dispense hot water, first press the EZ-Heat activation button. The red indicator light will begin flashing to indicate that the water heater is on and active.
Page 7
Cleaning the Condenser Vacuum or sweep away the dust from the condenser coils at the back of the dispenser. For best results, you can purchase Condenser a brush designed specifically for this purpose from your coils local appliance store. This will improve cooling and efficiency. Draining the Reservoirs Drain the reservoirs before and after cleaning, when going on long vacations or if not using the dispenser for long periods of time.
WARNING: The Water Dispenser SPECIFICATIONS heats and dispenses water to 198˚F / 92˚C which can cause severe GWD860W-3 burns or scalding. Output per hr: 1.2 gal / 4.6 L Cold 0.5 gal / 2.0 L DO NOT ALLOW CHILDREN TO USE Internal Tank: 0.3 gal / 1.1 L...
3. Let water sit for 2 hours. If the dispenser does not leak, it is the bottle that is leaking due to a small crack or pinhole and it needs to be replaced. If the dispenser is leaking, please contact Greenway Home Products at support@greenwayhp.com or 1-866-253-0447. Q: Why do I get a plastic taste from my dispenser? A: As with most new appliances such as coffee makers and kettles, there is often a plastic taste upon initial start-up of the unit.