Table of Contents
Advertisement
7 Listen to FM
radio stations
1
Turn the SOURCE knob to switch the
product to
.
2
Search for radio stations automatically or
manually.
Note
•
For optimal reception, fully extend the antenna and
adjust its position.
•
You can store a maximum of 30 FM radio stations.
Search for a radio station
automatically
Press SCAN to activate the auto search.
» After a strong radio station is detected,
the search stops and the radio station
is broadcast.
Search for a radio station
manually
Turn the
knob until the frequency of target
radio station is displayed.
Store radio stations
automatically
Press and hold SCAN until
» After the search is complete, the first
stored radio station is broadcast.
is displayed..
•
To tune to a stored radio station, turn the
PRESET knob until its frequency is displayed.
Program radio stations
manually
1
Tune to a radio station.
2
Press the PROGRAM button to activate
the programming.
3
Turn the
knob to select a preset
sequence number.
4
Press the
knob to confirm.
» The radio station is stored with the
selected sequence number.
5
Repeat steps 1-4 to program more radio
stations.
•
To tune to a preset radio station, turn the
PRESET knob until its frequency is displayed.
Note
•
If you store a radio station with the sequence number
of another one, the earlier one is overwritten.
Display RDS information
Radio Data System (RDS) is a service that
allows FM stations to transmit additional
information. When you tune to an FM radio
station that transmits RDS signals, the station
name is displayed.
1
Tune to an RDS station.
2
Press INFO repeatedly to scroll through
the following information (if available):
•
Radio text
•
Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
•
Program service
•
Mono/Stereo
•
Time
•
Date
EN
11
Advertisement
Table of Contents
