Clear A Staple Jam Inside The Stapler Unit - Oce Saddle Finisher-AF2 User Manual

Clear a staple jam inside the stapler unit

Introduction
If a staple jam occurs inside the stapler unit of the stacker/stapler (Finisher-AF1/Staple
Finisher-AF2), the operator panel will display the location of the staple jam and a proce-
dure to clear the staple jam. Follow the procedure on the operator panel to clear the staple
jam. The procedure below describes how to clear a staple jam inside the stapler unit of
the stacker/stapler.
Warning:
Be careful when you handle optional units that are attached to the machine. When you
open the door or cover of an optional unit to replace a staple cartridge, discard the punch
waste, or clear paper jams or staple jams, prints may still be output if other optional units
are operating normally, and are not involved in the paper or staple jam removal procedure.
How to clear a staple jam inside the stapler unit
Clear a staple jam
Step
1
2
#
Action
Open the front door of the stack-
er/stapler.
Remove the paper waiting to be sta-
pled from the output tray.
Clear a staple jam inside the stapler unit
Illustration
Chapter 4 - Troubleshooting 49