Check The Status Of The Staple Cartridges - Oce Saddle Finisher-AF2 User Manual

Check the status of the staple cartridges

Check the status of the staple cartridges
Introduction
The stacker/stapler is the output location that can staple printed documents before these
are delivered into an output tray. Before each of the following output trays, 2 staplers are
present:
• The upper tray.
• The lower tray.
• The booklet tray (optional).
The booklet tray is only available when your stacker/stapler is equipped with the op-
tional saddle stitch unit.
When all the staple cartridges are sufficiently filled, the staple icon in the dashboard is
blue. When the staple icon in the dashboard is orange or red, one of the staple cartridges
is empty or almost empty. You must refill the staple cartridge as soon as possible.
To find out which staple cartridge is empty or almost empty, you must go to the 'Printer'
section of the 'System' view. The icon for the staple cartridge that must be refilled is orange
or red.
Note:
Even when the staple icon is blue, you can still go to the 'System' view to check the
number of staples that has been used since the last refill.
The colors of the staple icon
The colors of the staple icon
Staple icon
20 Chapter 3 - Use the stacker/stapler
#
Description
A blue staple icon indicates that all the staple cartridges contain
sufficient staples.
An orange staple icon indicates that one of the staple cartridges
is almost empty.
A red staple icon indicates that one of the staple cartridges is
empty. The printer stops when a job requires staples from the
empty staple cartridge.