Electric Oven; Oven Function Control Knob - Electrolux Built-in oven Instruction Book

Electric oven

Oven function control knob

(Fig. 2)
It enables to select the most appropriate
type of heating for the different cooking
requirements by appropriately connecting
the heating elements and adjusting
temperature to the required level.
Meaning of the symbols:
Oven lamp
50-MAX Range of temperature regulation
for conventional cooking
Bottom heating element
Top heating element
To select the temperature turn the switch in
a clockwise direction and place sign in front
of the symbol corresponding to the
temperature required, included between 50
and MAX.The temperature will be maintained
constant by the thermostat.
If a different type of heating is required, for
example more heat on the bottom or the top,
you should turn the switch to the symbols
(heat from below) or
above). In these conditions the temperature
will never exceed 230°C.
Hotplate control knobs
The Control Knobs for the hotplates (Fig. 3)
can be found on the oven control panel. The
energy regulator of the hotplates can be set
by means of a 7-position control knob:
0 = Off
1 = Minimum
3 = Maximum
The intermediate positions give an increasing
heating power.
Carefully supervise cookings with oil
or fats, since these types of food can
result in a fire, when over-heated.
46
(heat from
Control lights
Oven thermostat control light: This light
goes off when the oven heats up to the
temperature set and comes on again every
time the thermostat cuts in to stabilize
temperature.
Operating control light: It indicates that
one or more of the heating elements are
turned on.
FO 2819
Fig. 2
Fig. 3
FO 2820
Be careful when you insert and extract
the grid and the dripping pan from the
oven in order not to damage the
enamelled surfaces of the oven cavity.