Cooking Duration Function; Setting The Time Of Day; Electronic Programmer - Electrolux Built-in ovens Instruction Book

Electronic programmer

5
6
2
Fig. 5
The oven will work only if the time of day has
been set. Moreover, the oven can also be operated
without any programme.

Setting the time of day

When the power supply is switched on, or after a power
failure, the "Time of day" pilot lamp
display.
To set the correct time of day:
1. press button " " or " ".
2. After the setting is carried out, wait for 5 seconds: the
"Time of day" pilot lamp
will show the set time. The appliance is ready for use.
To reset the correct time of day:
1. press button
function. The relevant pilot lamp will start flashing. Then
proceed as described above.
The time of day may be reset only if no automatic
function (cook duration
has been set.
"Cooking Duration" function
Thanks to this function, the oven will automatically switch
off at the end of a programmed cooking duration time.
Place food in the oven, select a cooking function and
adjust the cooking temperature. Press button
to select the "Cooking Duration" function. The relevant pilot
4
3
1
FO 2571
will go out and the display
repeatedly to select the "Time of day"
or end of cooking
1. Push button for selecting a function
2. Decreasing control button " "
7
3. Increasing control button " "
8
4. Display
5. "Cooking Duration" pilot lamp
6. "End of cooking" pilot lamp
7. "Minute minder" pilot lamp
8. "Time of day" pilot lamp
will flash on the
)
repeatedly
69