Page 1: Table Of Contents
CONTENTS For the user For the installer Safety instructions 22/23 Technical information Description of the appliance Installation Use of your appliance Unpacking Operating instructions 26/27 Installation Programme chart 28/29 Levelling Hints & Tips 30-32 Moving of the appliance Cleaning and maintenance Water connection If something doesn't work 34/35...
Page 2: Safety Instructions
Do not machine wash fabrics which are saturated with petroleum products. If volatile If your washing machine is in a room subject to cleaning fluids have been used, make sure temperatures below freezing, the water must that they are thoroughly removed from the be removed from the machine.
Page 3 In order to realize water and energy savings and to electromechanic safety prohibits the opening act in an environmentally conscious manner, we of the lid when the washing machine works and advice to follow the below instructions : 2 minutes after the end of the programme.
Page 4: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE Temperature selector Timer Control panel Pushbuttons Light Handle for opening lid Lever for castors Trap door for lint filter Detergent dispenser Symbols ( ) Washing powder for programmes with pre-wash (1). ( ) Washing powder or liquid detergent for the main wash (2).
Page 5: Use Of Your Appliance
USE OF YOUR APPLIANCE The control panel Never turn the programme selector when the appliance is working. 1 "EIN/AUS" pushbutton (on/off) 4 Programme selector Press the ON/OFF pushbutton, the programme It enables to select the most adapted programme starts : the control lamp lights on. to the nature and degreees of soil of your laundry.
Page 6: Operating Instructions
Pour the softener, if required, into the compartment marked ( ). Do not exceed the MAX level. Your washing machine has been conceived in order to save water and detergent products. Please take care the filling level of the detergent...
Page 7: Select The Temperature
6. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the °C fibers and the fastness of the colours. KALT 7. Select the programme Choose the programme according to the nature and the degree of soil of the laundry.
Page 8: Programme Chart
( ) : This programme with temperature selector on 60°C is the programme for Energy Label. (1) If the laundry can withstand the bleaching treatment. When the selected programme is over, the washing machine stops automatically. The timer knob stops on the position "I" after a spinning phase BE CAREFUL : THE LID CAN ONLY BE OPENED 90 SECONDS AFTER THE MACHINE HAS STOPPED.
Page 9 Pumpen Draining When the selected programme is over, the washing machine stops automatically. The synthetics programmes end by a rinse hold in order to avoid the formation of creases. You can end these programmes by a draining (by setting the timer on the programme "Pumpen") or by a short spinning (by setting the timer on the programme "Kurzschleudern").
Page 10: Hints And Tips
40°C. Sort your laundry. As you already know, your washing machine can Study carefully the chart in this booklet explaining also wash with cold water. However, it must be the symbols used on clothes labels (see page 32).
Page 11: Liquid Detergents
The manufacturer of your washing machine is not for main wash phases if you start the washing responsible for any damage deriving from the use machine immediately.
Page 12: Wash Code Symbols
Wash code symbols These symbols appear on fabric label, in order to help you choose the best way to treat your laundry. Strong wash Max. wash Max. wash Max. wash Max. wash temperature 30°C WASH temperature 95°C temperature 60°C temperature 40°C Do not Hand wash...
Page 13: Cleaning And Maintenance
CLEANING AND MAINTENANCE Make sure that the machine is unplugged and the water tap turned off before undertaking any kind of maintenance. Bodywork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning.
Page 14: If Something Doesn't Work
Check that : the water pression is sufficient. the pump filter is not obstructed. there has not been a power breakdown. The washing machine stops during a Check that : washing cycle. the water pression is sufficient. the pump filter is not obstructed.
Page 15: Service
IF SOMETHING DOESN'T WORK ? Problems Solutions The machine empties as it fills Check that : the end of the drain hose is not too low. There is water on the floor Check that : there is not too much detergent or unsuitable detergent.
Page 16: For The Installer
FOR THE INSTALLER Technical information Dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm Power supply voltage / frequency 220-230 V / 50 Hz Total power absorbed 2300 W (10 A) Heater rating 1950 W Water pressure minimum...
Page 17: Installation
This in order to avoid vibrations, noise or displace- ments of the appliance during operation. Moving of the appliance To move your washing machine, put it on its wheels by turning from the right to the left the special lever situated at the bottom of the ma- chine.
Page 18: Water Connection
(2,3 kW). Very important : The washing machine is provided with a feeding wire with earth connection: it must be connected to a plug like that is provided with a good earth connection.

ZANKER washing machine Instruction Book

For the Installer

Installation

Quick Links

For the user

Related Manuals for ZANKER washing machine

Summary of Contents for ZANKER washing machine

Table of Contents