Related Manuals for ZANKER CF2200
Summary of Contents for ZANKER CF2200
-
Page 1: Washing Machine
Wasautomaat ZANKER CF 2000 Lave-linge CF 2200 Waschautomat Washing machine Gebruiksaanwijzing Notice d’utilisation Bedienungsanleitung User manual 132996920... - Page 2 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages When unpacking the appliance, check that it is not damaged.
-
Page 3: Table Of Contents
Contents Warnings 68-69 Maintenance Bodywork Disposal Door seal Detergent dispenser drawer Tips for environmental protection 69 Drain filter Water inlet filter Technical specifications Emergency emptying out Frost precautions Installation Unpacking Something not working? 84-85 Positioning and levelling Water inlet Water drainage Electrical connection Your new washing machine Description of the appliance... -
Page 4: Warnings
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • All internal packing must be removed before using • Leave the porthole door slightly ajar when the the appliance. -
Page 5: Disposal
Child safety • Children are often not aware of how dangerous • Keep all detergents in a safe place out of electrical appliances can be. When the machine is children’s reach. working, children should be carefully supervised • Make sure that children or pets do not climb into and not be allowed to play with the appliance. -
Page 6: Technical Specifications
Technical specifications DIMENSIONS Height 85 cm Width 60 cm Depth 57 cm MAXIMUM LOAD Cotton Synthetics 2.5 kg Delicates 2.5 kg Woollens SPIN SPEED 1000 rpm max. (CF 2000) 1200 rpm max. (CF 2200) POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz TOTAL POWER ABSORBED 2200 W MINIMUM FUSE PROTECTION... -
Page 7: Installation
Installation Unpacking Positioning and levelling Install the machine on a flat hard floor. All transit bolts and packing must be removed Make sure that air circulation around the machine is before using the appliance. not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen You are advised to keep all transit devices so that units. -
Page 8: Water Drainage
Water-stop device The drain hose must not be kinked. The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the inlet hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window «A». -
Page 9: Your New Washing Machine
Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. •... -
Page 10: Use
Control panel 1 Programme chart 6 Half load button (HALF-VOLLE BELADING/DEMI-CHARGE) 2 Mains on light Select this button to reduce water consumption on the rinse cycle when washing a half load of cottons This light comes on when the ON/OFF button is or linens (programmes A and B). -
Page 11: Washing Hints
Laundry weights Washing hints The following weights are indicative: bathrobe 1200 g Sorting the laundry napkin 100 g Follow the wash code symbols on each garment quilt cover 700 g label and the manufacturer’s washing instructions. Sort the laundry as follows: sheet 500 g whites, coloureds, synthetics, delicates, woollens. -
Page 12: Detergents And Additives
Ink: depending on the type of ink, moisten the fabric Quantity of detergent to be used first with acetone (*), then with acetic acid; treat any The type and quantity of detergent will depend on residual marks on white fabrics with bleach and then the type of fabric, load size, degree of soiling and rinse thoroughly. -
Page 13: International Wash Code Symbols
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not... -
Page 14: Operating Sequence
Operating sequence 4. Select the desired option(s) Depress the required button(s). Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. -
Page 15: At The End Of The Programme
7. At the end of the programme The machine stops automatically. If you have selected a programme which ends with the water of the last rinse left in the tub (anti-crease option SPOELSTOP/ACP), drain the water before opening the door. Select programme “M” (drain) or release the same button (the machine will spin after draining). -
Page 16: Washing Programmes
Programme table Washing programmes for cotton and linen Consumptions* Additional Wash load Programme Temp. Fabrics Energy Water Duration functions max. min. WHITES WITH PREWASH, for ANTI-CREASE 1000 1200 example work 60°-95° 5 kg garments, sheets, household linen, HALF LOAD underwear, towels WHITES WITHOUT ANTI-CREASE PREWASH, for... - Page 17 Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Consumptions* Additional Wash load Programme Temp. Fabrics Energy Water Duration functions max. min. SYNTHETICS WITH PREWASH, for ANTI-CREASE example 30°-60° 1000 1200 2.5 kg underwear, coloured items, shirts, blouses SYNTHETICS WITHOUT PRE- ANTI-CREASE...
-
Page 18: Maintenance
Maintenance 1. Bodywork Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the Clean the outside of the machine with soap and drawer after cleaning. water only. Rinse with clean water and dry with a soft cloth. -
Page 19: Water Inlet Filter
• Remove any objects from the pump impeller by 7. Frost precautions rotating it. If the machine is installed in a place where the • Put the cap back on the emergency emptying temperature could drop below 0°C, proceed as hose and place the latter back in its seat. -
Page 20: Something Not Working
Something not working? Problems which you can resolve yourself, before calling the After Sales Service. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. - Page 21 Problem Possible cause • Water is not visible in the • The machine, which is the result of modern technology, runs in a very economical way with machine: low water consumption. Performance is nevertheless excellent. • Spinning starts late or the •...