Behringer Ultra Bass Chorus BUC400 User Manual

ULTRA BASS CHORUS BUC400
Ultimate Bass Chorus Effects Pedal
Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA BASS CHORUS BUC400.
This ultimate effects pedal is specifically designed to match the range and applications of bass guitars.
Thanks to its high-performance features you get super thick chorus with unbelievable stereo effect.
The chorus effect slightly detunes the original signal. A very pleasant detune effect is created relative to
the pitch variation. The chorus effect is often used for dispersing signals.

1. Controls

(5)
(1)
(2)
(8)
(1) The LEVEL control adjusts the output level.
(2) The LOW FILTER control lowers the amount of ultra-low frequencies in the effect signal to achieve
more defined tone and avoid muddiness of sound.
(3) The RATE control determines the chorus effect speed.
(4) Turn up the DEPTH control to achieve a more full and deeper effect sound.
(5) The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the effect.
(7) Use this 1/4" TS IN connector to plug in the instrument cable.
(8) The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if
you want to achieve full stereo chorus effect. For mono use just plug in OUT A.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
(4)
(3)
(7)
(6)