Checking The Jet Thrust Nozzle Angle; Checking The Shift Cable; Checking And Adjusting The Throttle Cable - Yamaha FX WaveRunner 2007 Owner's/Operator's Manual

EJU34320

Checking the jet thrust nozzle angle

Check the handlebars and jet thrust nozzle for
smooth operation.
Turn the handlebars as far as possible to the
right and left and check that the difference of
distances A and B between the jet thrust noz-
zle and the nozzle is within specification.
Difference of A and B:
Maximum 5 mm (0.20 in)
If the steering is stiff or misadjusted, have a
Yamaha dealer service it.
EJU34340

Checking the shift cable

Place the shift lever in the reverse position.
Make sure that the reverse gate makes con-
tact with the stopper on the bracket, and that
Maintenance and care
the shift arm makes contact with the reverse
gate.
1 Stopper
2 Shift arm
If the reverse gate does not reach the correct
positions, have a Yamaha dealer service it.
EJU34360
Checking and adjusting the throttle
cable
Check that the throttle cable moves back to
the set position smoothly and that the throttle
lever free play is within specification.
(1) Squeeze and release the throttle lever. If
the throttle lever does not return smooth-
ly, have a Yamaha dealer service it.
(2) Adjust the free play by loosening the lock-
nut and turning the adjuster.
1 Locknut
2 Adjuster
3 Throttle lever free play
Throttle lever free play:
4.0–7.0 mm (0.16–0.28 in)
82