Checking The Fuel System; Checking The Oil Injection System; Checking The Jet Thrust Nozzle Angle - Yamaha GP1300R WaveRunner 2008 Owner's/Operator's Manual

EJU34210

Checking the fuel system

EWJ00380
WARNING
Gasoline is highly flammable and explo-
sive. Failure to check for and repair any
fuel leakage could result in a fire or explo-
sion. A fire or explosion can cause severe
injury or death. Shut the engine off. Do not
smoke. Avoid spilling gasoline.
Fuel in the fuel lines is pressurized.
Fuel can spray out and cause injury or a
fire hazard if a fuel line is disconnected.
Do not run the engine with a fuel line dis-
connected.
Check the fuel system for leaks, cracks, and
malfunctions. If any problem is found, consult
a Yamaha dealer.
Check:
Fuel tank filler cap and seal for damage.
G
Fuel in fuel tank for water and dirt.
G
Fuel tank for damage, cracks, and leakage.
G
Fuel hoses and joints for damage, cracks,
G
and leakage.
Air bleeding passages for leakage.
G
EJU34230
Fuel tank
Check the fuel tank for leakage and for water
in the tank. If water is found in the fuel system,
or if the fuel tank needs to be cleaned, have a
Yamaha dealer service the watercraft.
1 Fuel tank
Maintenance and care
EJU34240

Checking the oil injection system

Check the oil injection system for leakage,
cracks, and malfunctions. Have a Yamaha
dealer repair the oil injection system if neces-
sary.
Check:
Oil tank for damage, cracks, and leakage.
G
Oil in the oil tank for water and dirt.
G
Oil hoses and joints for damage, cracks,
G
and leakage.
Oil filter for dirt.
G
Oil pump for leakage.
G
EJU34250
Oil tank
Check the oil tank for leakage and for water in
the tank. If water is found in the oil injection
system, or if the oil tank needs to be cleaned,
have a Yamaha dealer service the watercraft.
EJU34260
Oil filter
Have a Yamaha dealer check the oil filter for
dirt and clogs.
EJU34321

Checking the jet thrust nozzle angle

Check the handlebars and jet thrust nozzle for
smooth operation.
Turn the handlebars as far as possible to the
right and left and check that the difference of
distances A and B between the jet thrust noz-
zle and the nozzle is within specification.
72