Tachometer - Yamaha XLT800 WaveRunner 2002 Owner's/Operator's Manual

3. Enter your four-letter code by pressing
the "A/SET," "B," or "C" buttons in the
right sequence.
NOTE:
@
If you do not press a button for more than 10
seconds, the display automatically turns off.
This cancels the process of selecting the
mode.
@
4. If the code entered is correct, the mode
will change from the previous mode to
either "START" or "LOCK." Then the
mode display and buzzer will operate for
2 seconds.
NOTE:
@
G Once you select a mode, the mode will
not change unless you perform this mode
selection sequence again.
G
If the wrong code is entered, the mode
display shows "ERROR" for 2 seconds
and the buzzer will sound 5 times. Then
the display returns to "COdE."
@
EJU01225

Tachometer

The engine speed (r/min) is displayed by
segments. Each segment indicates a 200 r/min
increment.
2-21
E