Hour Meter; Trip Timer - Yamaha XLT1200 WaveRunner 2002 Owner's/Operator's Manual

6. The buzzer will sound twice. The warn-
ing light and "SET" blink for 2 seconds.
Then the display turns to "CLOCK" and
shows the time.
NOTE:
@
If the battery terminal is disconnected, the
clock will be reset to 12:00.
@
EJU01230

Hour meter

The hour meter is provided to make it
easy to follow the maintenance schedule.
The meter shows how many hours of
engine operation have elapsed since the
watercraft was new.
To show the hour meter, press the
"MODE" button until the display shows
"HOUR.M" while the engine is running.
EJU01231

Trip timer

The trip timer is provided for counting the
time traveled on a given trip.
To show the trip timer, press the "MODE"
button until the display shows "TRIP .T" while
the engine is running.
1 Minutes
2 Seconds
1. When the display shows "TRIP .T," press
the "A/SET" button to start counting. The
buzzer will sound once.
2. Press the "A/SET" button again to stop
counting. The buzzer will sound once.
3. Press "MODE" button for at least
2 seconds to set the time back to 00:00.
The buzzer will sound twice. The time
display and "TRIP .T" blink for 2 seconds.
Now it is ready to start counting.
2-26
E