Yamaha XL700 WaveRunner 2003 Owner's/Operator's Manual page 95

G Throttle cable (handlebar end)
Squeeze the throttle lever and remove the
seal 1. Spray a rust inhibitor into the
outer cable. Refit the seal securely.
G
Steering cable (handlebar end)
G Steering handle pivot shaft
If the steering pivot shaft becomes loose,
tighten the band 1 until a satisfactory feel
is obtained.
G Steering cable (nozzle end)
G Nozzle pivot shaft
G Intermediate housing
Using a grease gun, fill the intermediate
housing with water resistant grease
through the grease nipple 1.
Grease capacity:
Initial 10 hours or 1 month:
33.0–35.0 cm
Every 100 hours or 12 months:
6.0–8.0 cm
4-16
E
3
(1.11–1.18 oz)
3
(0.20–0.27 oz)