Yamaha XL700 WaveRunner 2003 Owner's/Operator's Manual page 29

1 Engine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
2 Engine stop switch
Push to stop the engine normally.
3 Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental starting of the engine or unauthorized
use of the watercraft.
4 Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
5 Start switch
Push to start the engine.
6 Oil level warning lamp
7 Throttle lever
Use to accelerate and decelerate.
8 Stern drain plugs
Use to drain water in the bilge when the water-
craft is on dry land.
9 Jet thrust nozzle
Changes the direction of jet thrust according
to handlebar position.
0 Cleat
Use to attach a towrope for pulling water-skier
or a rope mooring the watercraft.
A Ride plate
2-2
E