Table of Contents
Advertisement
A
B
ESU00195
Rear suspension spring preload adjustment
The rear suspension is equipped with two shock absorb-
ers. One is in the front 1 and the other is in the rear 2 of
the rear suspension assembly.
The spring preload can be adjusted by turning the spring
preload adjuster 3 on the front and rear shock absorb-
ers.
CD-15E
Spring seat length
Preload
È a Length (front)
É b Length (rear)
WARNING
@
Be sure to have a Yamaha dealer make this adjust-
ment.
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury, or property damage.
G
Do not tamper with or attempt to open the shock
absorber.
G
Do not subject the shock absorber to an open
flame or other high heat sources, which could
cause it to explode.
G
Do not deform or damage the shock absorber in
any way.
G
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
8-21
Standard
←
Long
←
Hard
Maximum
96.8 mm
86.8 mm
(3.81 in)
(3.42 in)
Maximum
80.3 mm
70.3 mm
(3.16 in)
(2.77 in)
→
Short
→
Soft
Minimum
76.8 mm
(3.02 in)
Minimum
60.3 mm
(2.37 in)
Advertisement
Table of Contents
