Battery - Yamaha RAPTOR YFM50RW Owner's Manual

hose routing.
To store the battery
If the ATV will not be used for more than one
month, the battery will need to be removed and
stored as follows.
1. Disconnect the negative lead first and then the
positive lead.
2

1. Battery

2. Negative lead
3. Positive lead
2. Remove the battery, fully charge it, and then
place it in a cool, dry place.
1
3
8-29
ECB00600
CAUTION:
Do not leave or store the battery on its side.
3. If the battery will be stored for more than two
months, check the specific gravity of the elec-
trolyte at least once a month and fully charge
the battery whenever necessary.
To install the battery
NOTE:
Be sure the battery is fully charged.
1. Install the battery.
2. Connect the positive lead first, and then con-
nect the negative lead.
3. Make sure that the breather hose is properly
routed, in good condition, and not obstructed.
1
2
3
4
5
6
7
8
9
10
11