Loading A Disc; Ejecting A Disc - Yamaha CRW2100IX Series Owner's Manual

Loading a Disc

1
1 Open the tray by pressing the Eject button on the CRW2100IX drive's front
panel.
2 Place the disc onto the tray with its label or printing facing upward.
3 Press the Eject button to close the tray.
n When a disc is loaded, the LED is lit up in orange first, then changes to green. For
more details, refer to page 29.
n Do not push or pull the tray using excessive force. Doing so can damage the drive
or the disc. Instead, always use the Eject button to open or close the tray.

Ejecting a Disc

1
1 Open the tray by pressing the Eject button on the CRW2100IX drive's front
panel.
2 Remove the disc from the tray.
3 Press the Eject button to close the tray.
n It may not be possible to open the disc tray while a disc is being read or written.
n Only remove the disc after the disc tray has fully opened. Otherwise, you risk
damaging the drive or the disc.
Operations
2
2
20