Installation Precautions - Yamaha CDR400Atx Series User Manual

Installation Precautions

• Install CDR400Atx on a level surface.
• Do not install CDR400Atx near water, in direct sunlight, close
to heating units, or in areas subject to high or low temperature
extremes, excessive dust, vibration, or severe shocks.
• Do not expose CDR400Atx to extremes of humidity.
• The ambient temperature where CDR400Atx is installed
should be between 5 C and 40 C (41 F–104 F).
• Using CDR400Atx close to a television or radio may cause
interference. Install CDR400Atx at least one meter away from
television and radio equipment.
• Do not block the CDR400Atx ventilation slots. Install
CDR400Atx with at least 10 cm of free space all-around.
• Make sure the CDR400Atx power cord is not located in a
position where it is likely to be walked on or pinched by other
equipment.
Installation Precautions
ii