Chapter 2 - Touring Around Cdr400Atx; Rear Panel - Yamaha CDR400Atx Series User Manual

Chapter 2 - Touring Around CDR400Atx

Chapter 2 - Touring Around CDR400Atx

Rear Panel

1 AC IN
Connect the included power cable here.
2 CDR ID
Use this switch to set a unique SCSI ID number for the CDR400Atx.
3 TERMINATOR
This switch is used to set termination. Refer to the terminator setting
section for details.
4 LINE OUT (L, R)
These jacks are used to output audio to the amplifier.
5 SCSI-1, SCSI-2
These connectors are used to connect the CDR400Atx in the SCSI
daisy chain.
6
AC I N
CDR ID
1
2
1
5
SCSI-1
SCSI-2
LINE OUT
R
TERMINATOR
OFF ON
3 4
L