3. If the electrolyte is at or below the
minimum level mark, continue with
the following steps.
4. Remove the rider seat. (See
page 3-9 for rider seat removal
and installation procedures.)
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Starter moter lead (black)
2. Positive battery lead (red)
3. Negative battery lead
5. Disconnect the negative battery
lead from the battery.
6. Disconnect the positive battery
lead and the starter motor lead
from the starter motor relay.
6-36
1. Ignition coil assembly (× 2)
2. Bolt (× 2)
3. Coupler (× 4)
7. Disconnect the couplers shown.
8. Remove the ignition coil assem-
blies by removing the bolts.
9. Add distilled water to raise the
electrolyte to the maximum level
mark.
6