Handlebar Switches - Yamaha RAPTOR YFM80WS Owner's Manual

EBU00053

Handlebar switches

q
1. Engine stop switch "ENG. STOP"
2. Start switch "START"
EBU11580
Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in the
"RUN" position before starting the engine. The
engine stop switch controls ignition and can be
used at all times to stop the engine, especially in
an emergency. The engine will not start or run
when the engine stop switch is turned to "OFF".
w
EBU00056
Start switch "START"
The starter motor cranks the engine when this
switch is pushed.
cC
See starting instructions prior to starting
engine (see page 6-1 for details).
NOTE:
If the starter switch is pushed with the main
switch "ON" and the engine stop switch "OFF",
the starter motor will be activated but the engine
will not start. To start the engine, be sure to
position the engine stop switch at "RUN".
4-2