Clutch Adjustment - Yamaha RAPTOR YFM80WS Owner's Manual

EBU00872

Clutch adjustment

1. Remove the rubber cap.
2. Loosen the locknut.
3. Slowly turn the adjusting bolt clockwise
until resistance is felt. Then turn it 1/8
counterclockwise.
1. Rubber cap 2. Locknut
4. Tighten the locknut to the specified torque.
Tightening torque:
8 Nm (0.8 m0kgf, 5.8 ft0lbf)
q w
e
3. Adjusting bolt
NOTE:
Turn the adjusting bolt clockwise to decrease
the clutch free play and turn it counterclockwise
to increase the free play.
5. Install the rubber cap securely.
8-23