EMU00303
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch "UP"
until the engine is supported by the tilt
rod.
2) Release the tilt-support lever.
3) Push the power trim/tilt switch "DN"
(Down) to lower the engine to the
411045
desired position.
EMU00316
CRUISING IN OTHER
CRUISING IN SALT WATER
After operating in salt water, wash out the
cooling-water passages with fresh water to
prevent them from becoming clogged-up
with salt deposits.
NOTE:
Refer to cooling system flushing instructions
in "TRANSPORTING AND STORING OUT-
BOARD MOTOR".
CRUISING IN TURBID WATER
It is strongly recommended that the optional
chromium-plated
installed if the outboard is to be used in tur-
bid (muddy) water conditions.
3-24
CONDITIONS
water-pump
E
kit
be