Disconnecting The Battery; Checking Top Cowling - Yamaha Z200 Owner's Manual

when installing the battery and discon-
nect the black battery cable first when
removing it. Otherwise, the electrical
parts can be damaged.
The electrical contacts of the battery
G
and cables must be clean and properly
connected, or the battery will not start
the engine.
Connect the RED lead to the POSITIVE (+)
terminal first. Then connect the BLACK lead
to the NEGATIVE (-) terminal.
1. Red cable
2. Black cable
3. Battery
Using an accessory battery (option)
Use a connecting cable between the (-) ter-
minals of the starting battery and accessory
battery. See the illustrations of the wiring
connections. This cable must be made from
wire equivalent to the starting battery cable.
EWM00600
WARNING
Use of smaller wire could lead to a fire.
7
1. Battery for accessories
2. Battery for starting
3. Large black lead
4. Large red lead for starting battery
5. Negative connecting cable
6. Power for accessories
7. Small red lead for accessory battery charg-
ing (optional part)
NOTE:
If a battery selector switch is desired, consult
your YAMAHA dealer about correct wiring.
EMU29370

Disconnecting the battery

Disconnect the BLACK cable from the NEG-
ATIVE (-) terminal first. Then disconnect the
RED cable from the POSITIVE (+) terminal.
EMU29390

Checking top cowling

Check the fitting of the top cowling by push-
ing it with both hands. If it is loose have it re-
paired by your Yamaha dealer.
Maintenance
3
4
2
1
6
ZMU01942
5
71