Checking Bolts And Nuts; Motor Exterior; Coating The Boat Bottom - Yamaha 15A Owner's Manual

Table of Contents

Advertisement

EML40010

CHECKING BOLTS AND NUTS

1) Check that bolts securing the cylinder
2) Check the tightening torques of other
EMU00409

MOTOR EXTERIOR

EMU00410
Cleaning the Outboard Motor
After use, wash the exterior of the out-
board with fresh water.
Flush the cooling system with fresh
water.
NOTE:
Refer to Flushing Cooling System instruc-
tions in "TRANSPORTING AND STORING
102031
OUTBOARD MOTOR".
Checking Painted Surface of Motor
Check the motor for scratches, nicks, or
flaking paint. Areas with damaged paint
are more likely to corrode.
If necessary, clean and paint the areas.
Consult a Yamaha dealer for touch-up
paint.
EML44010

COATING THE BOAT BOTTOM

A clean hull improves boat performance.
The boat bottom should be kept as clean
of marine growths as possible.
If necessary, the boat bottom can be coat-
ed with an anti-fouling paint approved for
your area to inhibit marine growth.
Do not use anti-fouling paint which
includes copper or graphite. These paints
102025
can cause more rapid engine corrosion.
4-21
head and engine and the nut securing
the flywheel are tightened with their
specified tightening torques.
bolts and nuts.
E

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9.9a9.9c15c9.9b15b

Table of Contents