Replacing A Front Turn Signal Light Bulb - Yamaha MORPHOUS CP250V Owner's Manual

Replacing a front turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Remove cowlings A and B. (See
page 6-8.)
3. Remove the bolts, washers, and
well nuts.
1
1 2
3 2
1. Bolt
2. Washer
3. Well nut
4. Pull the rubber cover off as shown.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU38221
1. Rubber cover
5. Disconnect the coupler shown,
3
and then remove the multi-function
display unit by pulling it out.
1
1. Coupler
2. Multi-function display unit
6. Remove the screws and then pull
the panel off as shown.
1
1. Screw
2. Panel
2
1. Front turn signal light unit
2. Screw
6-39
1
1
7. Remove the front turn signal light
unit by removing the screws.
2
1
8. Remove the socket (together with
the bulb) by turning it counter-
2
2
3
4
5
6
7
8
2
9