Yamaha FZ1 Owner's Manual page 43

ITEM
Throttle grip
Control cables
Drive chain
Wheels and tires
Brake and shift pedals
Brake and clutch levers
Centerstand, sidestand
Chassis fasteners
Instruments, lights, signals
and switches
Sidestand switch
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
PRE-OPERATION CHECKS
CHECKS
4-2
PAGE
6-22,
6-33
6-33
6-31–6-32
4
6-23–6-26
6-33
6-34
6-34
—
—
3-17