Brake; V-Belt - Yamaha VK540EK Owner's Manual

ESU00921

Brake

Test the brake at a low speed when starting out to make
sure that it is working properly. If the brake does not pro-
vide proper braking performance, inspect the brake for
wear. (See page 8-14 for more details.)
WARNING
@
Do not operate the snowmobile if you find any prob-
lems in the brake system. You could lose braking
ability, which could lead to an accident. Ask a
Yamaha dealer to inspect and repair the brake sys-
tem.
@
CAUTION :
@
Make sure that the brake lever end does not project
out over the handlebar end. This is to prevent brake
lever damage when the snowmobile is placed on its
side.
@
ESU00941

V-belt

Open the shroud and remove the drive guard.
Check the V-belt for wear and damage. Replace if neces-
sary.
Wear limit a:
31.4 mm (1.24 in)
WARNING
@
G Make sure that the drive guard is tightened
securely before operating the snowmobile.
G Never run the engine without the V-belt or with
the drive guard removed.
@
6-4