Front Brake Lever; Brake Pedal And Rear Brake Lever - Yamaha GRIZZLY 550 2015 Owner's Manual

decrease the maximum engine power avail-
able and the maximum speed of the ATV, turn
the adjusting screw in direction (b). Do not
turn the adjusting screw out more than 12
mm (0.47 in) or the throttle cable could be
damaged. Always make sure the throttle lever
free play is adjusted to 3.0–5.0 mm (0.12–
0.20 in). (See page 8-45.) WARNING! Im-
4
proper adjustment of the speed limiter and
throttle could cause throttle cable damage
or improper throttle operation. You could
lose control, resulting in an accident.
[EWB00242]
3
1. Locknut
2. Adjusting screw
3. No more than 12 mm (0.47 in)
2
1
(b)
(a)
4-14
3. Tighten the locknut.
EBU18392

Front brake lever

The front brake lever is located on the right han-
dlebar. To apply the front brake, pull the brake le-
ver toward the handlebar grip.
1. Front brake lever
EBU18443

Brake pedal and rear brake lever

The brake pedal is located on the right side of the
ATV and the rear brake lever is located on the left
handlebar. To apply the rear brake, push down on
the brake pedal or pull the brake lever toward the
handlebar grip.