VTech t 2453 Manual page 29

Answering System
Remote Access Commands
Function:
Function: Command:
Record memo
End remote access call
Turn system off
Turn system on
NOTE: If no key is pressed within 10 seconds of entering remote access, the
voice menu will be announced. After the voice menu announcement, if no key is
pressed within 20 seconds, the remote access call will automatically end.
- Remote Access
(continued)
Command:
Press *8 , then mailbox number where
you want memo recorded; speak after
beep; press #5 when finished.
Press *0 .
Press #0; the system announces,
" A nswering machine off." Press # 0
again to turn the system back on.
When system is off, it answers after 10
rings and announces, " P lease enter your
security code." Enter your remote access
code.
29