Record Your Announcement - VTech t 2453 Manual

Answering System Operation
Turn Answering
System on or off

Record Your Announcement

NOTE: If you have assigned different mailboxes to different people, be sure to
tell callers in your announcement to press 1 ,2 , or 3 to leave a message in the
appropriate mailbox. For example: "Thank you for calling. To leave a message
for Bob, press 1 now. To leave a message for Sue, press 2 now. To leave a
message for Elmo, press 3 now. Or, wait for the beep, and leave your message."
1. Press MENU until you hear " R ecord Outgoing Message."
2. Press REC/MEMO. After you hear " N ow recording" followed by a beep,
speak toward the base to record an announcement up to 90 seconds long.
3. Press any MAILBOX button to stop recording. The system plays back your
recorded message.
To review your announcement at any time:
1. Press MENU until you hear " R ecord Outgoing Message."
2. Press any MAILBOX button.
To delete your announcement:
Press DELETE during announcement playback. The system will use the
pre-recorded announcement until you record a new one.
At The Base
Enter Answering
System
setup and choose a
feature to
Record
announcement s ,
and memos.
24
Select a feature
setting
feature
set.....
Review/change
clock setting;
confirm feature
settings .
outgoing