F F A A Q Q; Appendix A - Accusys ACS-76130 Manual

Appendix A – FAQ
A A p p p p e e n n d d i i x x A A
F F A A
F A
If you encounter a problem while using the ACS-76130, check this section for help.
1. When I lock a drive carrier with a disk drive in place, the red disk activity indicator
turns on and an alarm beep sounds. Why?
(a) Make sure you firmly connect the SATA connector of the HDD to their counterparts
inside the drive carrier and try again. If this does not solve the situation, go to (b).
(b) Change the disk drive with a new one and try again.
(c) Exchange the top and bottom drive carriers and try again to determine if the carrier
itself is faulty.
(d) If all of the above steps fail, contact your vendor.
2. How can I turn off the alarm beep sound when there is a hard disk failure?
Unlock the drive carrier of the failed disk. This will turn off the alarm beep sound.
3. I have connected the RAID controller, but it does not appear in the motherboard
BIOS. Why?
Ensure that an array is initialized.
Q Q
Q