Table of Contents
Advertisement
6. Turn on the ACS-76130 and press the ESC button on the host computer keyboard. The ">>>"
prompt will appear.
7. Type in the command "download" to go to the firmware download mode, then type "1" to
download code (Firmware or Bootcode).
>>> download
restart ... 01 GPIO 01 AAA 01 01
========= 76 Download Mode =========
Enter '1'
to Download Code (Firmware, Bootcode)
'ESC' exit
8. Locate the updates firmware file to send. For HyperTerminal, go to the Transfer menu and select
Send Text File.
9. Send the firmware file as a text file. The file will start to download.
Caution
Do not turn off the system or interrupt program
during firmware-updating procedure.
10. When the file has been downloaded, after ACS-76130 restarted, the firmware-updating procedure
is finished.
Advertisement
Table of Contents
