Table of Contents
Advertisement
PLEASE READ THE INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP.
TOOLS REQUIRED:
Philips head screwdriver (not provided), wrench (provided), Allen key (provided). The following
hardware is provided.
Item
1
2
Step 1:
Remove side panel (marked "L") and two 3" casters from the carton . Put two casters and side
panel marked "L" together with provided wrench. Repeat this figure for the right side panel.
Step 2:
Assemble bottom panel to side panels with 8 pieces of Truss Head ¼-20 x 1-1/2" screws. Follow
the mark "L" and "R" accordingly.
Assemble Instructions
Description
Truss head screw
Truss head screw
Specification
1/4-20*1-1/2 inch
1/4-20*1/2 inch
Truss Head 1/4" –20×1 1/2"Serew
4
Quantity
12pcs
18pcs
Advertisement
Table of Contents
