Table of Contents
Advertisement
Repeat A - B
This function can play a specific section in a chapter / track repeatly.
A-B
1
Select
from the menu bar and press
starting portion that you want.
2
Press
key again at the end portion that you want. The
specific section will now repeat continuously.
3
Press
key the third time to cancel this function.
Note:
The A-B can be set only within the same chapter/track.
Playback Control (PBC)
PBC playback allows you to play Video Cds interactively, following
the menu on the display.
-
Select
in the menu bar and press
ON or PBC OFF.
When playing a disc with PBC function
-
Select
in the menu bar and press
ON or PBC OFF.
-
If "PBC OFF", press play key and the system will start playback
automatically.
-
If "PBC ON", the PBC menu (if available) will appear on the TV
screen for selection. Use the number keys (0~9) to enter your
choice.
Note
If PBC mode is switched on, TIME SEARCH and REPEAT functions
are not available.
Program play
You can play the contents of the disc in the order you want by
programming the order of the tracks to be played. Up to 99 tracks
can be stored.
1
Select
in the menu bar and press
program mode.
"
"
-
is displayed.
2
Use the number keys (0~9) to input the track number in the
order you want.
-
If you attempt to program more than 99 tracks,
displayed.
3
Press OK to store the track.
4
To start program play, press
5
To stop play back, press
6
To cancel the program, press
12
Special Functions
key to the
key to select PBC
key to select PBC
key to enter
"
"
is
.
once.
again.
Selecting the surround sound
mode
Select
from the menu bar and press
select desire surround sound mode.
STEREO
VSS
PROLOGIC
-
Stereo
All sound is reproduced and played through the left and right
speakers. This enable standard stereo reproduction.
-
VSS (Virtual Surround Sound)
The ProLogic MPEG or Dolby Digital surround channel is
processed by a "virtualiser" DSP to add surround effect from
just the two front speakers.
-
Dolby ProLogic Surround
The Dolby ProLogic Surround system is a specially encoded
two channel analogue format that will produce sound through
four speaker channels (front left, center, front right, mono
surround) when a Dolby ProLogic Decoder is used. It is also
compatible with stereo systems but the user will stereo system
but the user will only have two channels (front left and right of
sound).
Dimming the display screen
1
Select
from the menu bar and press
different levels of brightness for the display screen: HIGH, MID
or LOW.
Sleep timer setting
The sleep timer enables the system to switch to standby mode
automatically at a present time.
1
Select
from the menu bar and press
select a present time.
-
The selections are as follows (time in minutes).
15
30
45
60
2
To cancel the sleep timer
-
Press
key repeatedly until the "OFF" appears.
key repeatedly to
STEREO
...
key to select
key repeatedly to
90
120
OFF
15...
Advertisement
Table of Contents
