Picture Zooming; Repeat; Angle Selection - VIETA DVD-50 Instruction Manual

Picture Zooming

This function allows you to enlarge the picture on the TV screen and
to pan through the enlarge image.
1 Press ZOOM repeatedly to select a zoom factor as below:
ZOOM x 1.5
ZOOM x 2
ZOOM x 3
ZOOM OFF
2 To pan through the enlarge image, press OK to confirm the
zoom selection and use
zoomed picture left, right, up or down.
3 Some disc may not respond to the zoom feature.

Repeat

For DVD discs
Press REPEAT repeatedly to select the following on the display:
[REPEAT - 1] : repeat chapter
[REPEAT - A] : repeat title/disc
For VCD discs
Press REPEAT repeatedly to select the following on the display:
[REPEAT - 1] : repeat the current track
[REPEAT - A] : repeat the entire disc
Note
When operating function, the OSD will display the operating
information, but the VFD will not.
8
Basic operations
/ / / keys to move the

Angle Selection

Some DVD discs contain scenes which have been taken photos
simultaneously from a number of different angle. For these discs, the
same scenes can be viewed from each of different angles. (The
recorded angles different from disc to disc.) You should set the angle
mark to ON or press ANGLE key to set angle mark.
While playing a title shot from different angles, the angle mark
appears on TV screen. Off course, you can turn off it by
setting.
Press the remote ANGLE button to change the scences from
one angle to another angle(s)
For example: 1/4, 2/4, 3/4, 4/4.