Table of Contents
Advertisement
Navigation Operation
4) Once pressd the " ACCEPT" BUTTON, unit will get into the
GPS NAVIGATION MODE, and the below screen will
appear. And now end user is ready to enjoy the GPS
NAVIGATION SYSTEM of this unit.
5) For the details operation of the GPS NAVIGATION SYSTEM
of this unit, please refer to the GPS NAVIGATION SYSTEM
USER MANUAL provided together with this unit.
Tips: End user can switch to GPS NAVIGATION MODE, or GPS
MAP SCREEN at any time, in any mode by pressing the "GPS
MODE" button on the front panel. And pressing this " GPS MODE "
button to switch back to the previous mode.
Tips: End user can turn on or off the "GPS NAVIGATION VOICE
GUIDE" by pressing the "NAVI VOICE" button on the front panel.
Once this NAVI VOICE GUIDE is turned on, whenever there is any
NAVI VOICE GUIDE, the current mode's audio output will be cut,
and switch to the NAVI VOICE GUIDE, then switch back to the
current mode's audio output.
Attention!
If you are using the software product during driving
or transportation, we strongly advise you to direct all
your attention to driving or transportation, and to
Especially do not try to operate, enter data into or
obtain data from the software product while driving,
because such presents a life hazard, and the lack of
proper attention may cause death, injury or matertal
damge.
Accept
Cockpit
No GPS
signal
2005-05-27
Find & Go
12:05
BR - 72
Settings
About
Map
Exit
Advertisement
Table of Contents
