Table of Contents
Advertisement
Installation the Unit
No.
1
Dashboard
2
Nut (5mm)
3
Spring washer
4
Screw (4X12mm)
5
Screw
6
Support Strap
Be sure to use the support strap to secure the back
of the unit in place. The strap can be bent by hand to
the desired angle
7
Plain washer
Removing the unit
No.
1
Frame
2
Insert fingers into the groove in the front of frame
and pull out to remove the frame. (When re-attaching
the frame, point the side with a groove down wards
and attach it.)
3
Insert the levers supplied with the unit into the
grooves at both sides of the unit as shown in figure
until they click. Pulling the levers makes it possible to
remove the unit from the dashboard.
1
2
182
53
3
Content
1
6
7
4
5
2
3
Content
BR - 10
Advertisement
Table of Contents
