Use; Control Panel; Controls - Zanussi ZWF 3122 User Manual

Use

Control panel

Programme Option buttons
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds.
1 "Quick wash/Extra quick" button
By depressing this button you can select two different
options:
Quick wash
• : to be used for lightly soiled cotton
or synthetic items in order to obtain good washing
performance in a short time.
Extra quick
• : a very short cycle for cotton,
synthetic or delicate items (not avaiable for
wool/handwash) that have been used or worn for
a short time.
The light corresponding to the selected option
illuminates.
These options cannot be used with the Eco option
(B-programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. recommended load for cotton 3 kg.
2 "Prélavage/Voorwas" (Prewash) button
Select this option if you wish your laundry to be
prewashed before the main wash (not available for
wool/handwash).
The prewash ends with a short spin in programmes for
cotton and synthetic fabrics, whereas in the programme
for delicate fabrics the water is only drained.
3 "Rinçage+/Spoelen+" (Extra Rinse)
button
The Extra Rinse option can be selected with all
programmes except the wool/handwash
programme. The machine will perform 2 additional
rinses. This option is recommended for people who
are allergic to detergents, and in areas where the
water is very soft.
4 "Demi-charge/Halve belading" (Half
load) button
Select this button to reduce water consumption on
the rinse cycle when washing a half load of cottons
or linens (A-B-C-D-F).
5 "Départ/Pause / Start/Pauze"
(Start/Pause) button
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
66