Hdmi Settings; Digital Audio Output - Toshiba REGZA RL83 Digital Series Owner's Manual

HDMI Settings

Some early HDMI equipment may not work properly with your
HDMI TV. Please try setting the Enable Content Type and
INSTAPORT™ options to Off. Adjusting these settings should
allow your early HDMI source to operate properly with your
television.
a
In the PREFERENCES menu, press
Connection and press OK.
b
B b
Press or to highlight HDMI Settings and press
OK.
NOTE: HDMI Settings is grayed out on non-HDMI
inputs.
c
B b
Press or to select an item, and then press
to select a setting.
HDMI Settings
Enable Content Type
INSTAPORT TM
RGB Range
• Enable Content Type: On
This feature is part of the HDMI1.4 standard.
When set to On, the TV will automatically adjust
settings according to the content type data sent
from the connected HDMI device.
• INSTAPORT™: On
This feature reduces the lag time when switching
HDMI sources.
• RGB Range: Auto
This feature adjusts RGB full range signal
automatically. When Limited is selected, RGB signal
is output in the range from 16 to 235. When Full is
selected, RGB signal is output in the range from 0 to
255.
NOTE:
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
• All of the above HDMI settings need proper HDMI source
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.
When connecting a surround sound amplifier to the digital audio
output (Sony/Philips Digital Interface Format [S/PDIF]), the
PCM: This mode outputs PCM format to the digital audio output
b
to highlight AV
Auto: This mode outputs Dolby Digital (if available) or PCM to
a
C c
or
b
On
On
Auto
c
63

Digital Audio Output

following options can be selected.
socket.
the digital audio output socket.
S
Dolby Digital Dolby Digital
S
Dolby Digital Plus Dolby Digital
S
MPEG PCM
S
HE-AAC Dolby Digital
In the PREFERENCES menu, press
Connection and press OK.
B b
Press or to highlight Digital Audio Output.
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
Colour Decoding
Digital Audio Output
C c
Press or to select PCM or Auto.
CONTROLS AND FEATURES
b
to highlight AV
HDMI 3
Auto
Auto
Auto